Morphological Characteristics Research Articles

Starch and sucrose metabolism plays an important role in the stem development in Medicago sativa

The forage quality of alfalfa (Medicago sativa) stems is greater than the leaves. Sucrose hydrolysis provides energy for stem development, with starch being enzymatically converted into sucrose to maintain energy homeostasis. To understand the physiological and molecular networks controlling stem development, morphological characteristics and transcriptome profiles in the stems of two alfalfa cultivars (Zhungeer and WL168) were investigated. Based on transcriptome data, we analysed starch and sugar contents, and enzyme activity related to starch-sugar interconversion. Zhungeer stems were shorter and sturdier than WL168, resulting in significantly higher mechanical strength. Transcriptome analysis showed that starch and sucrose metabolism were significant enriched in the differentially expressed genes of stems development in both cultivars. Genes encoding INV, bglX, HK, TPS and glgC downregulated with the development of stems, while the gene encoding was AMY upregulated. Weighted gene co-expression network analysis revealed that the gene encoding glgC was pivotal in determining the variations in starch and sucrose contents between the two cultivars. Soluble carbohydrate, sucrose, and starch content of WL168 were higher than Zhungeer. Enzyme activities related to sucrose synthesis and hydrolysis (INV, bglX, HK, TPS) showed a downward trend. The change trend of enzyme activity was consistent with gene expression. WL168 stems had higher carbohydrate content than Zhungeer, which accounted for more rapid growth and taller plants. WL168 formed hollow stems were formed during rapid growth, which may be related to the redistribution of carbohydrates in the pith tissue. These results indicated that starch and sucrose metabolism play important roles in the stem development in alfalfa.

First Report of Anthracnose Caused by Colletotrichum spaethianum on Zephyranthes candida in China.

Zephyranthes candida, an bulbous perennial plant, are planted in almost every park. In October 2023, anthracnose symptoms were observed on Z. candida leaves in Jiangxi Agricultural University (28.75° N, 115.83°E), Nanchang, Jiangxi Province, China, and the incidence of disease were up to 35% (140 of 400 plants). The lesions extended fromtheleafapextothebase, appearing as a dark brown color, and later changed to yellow and became dry. To isolate the pathogen, 20 symptomatic leaves were collected and cut into small pieces (4×4 mm, one pieces per leave), surface-sterilized with 70% ethanol for 10 s and 1% NaClO for 30 s, rinsed thrice with sterile water, placed onto potato dextrose agar (PDA) plates and incubated at 25℃ for 5 days. Fifteen isolates (15 out of 20) with similar morphological characteristics were obtained. The colonies on PDA presented effuse mycelium, initially white and later pale gray. Conidia were hyaline, curved or slightly curved, aseptate, with a truncate base and acute apex, measuring 17 to 23 × 3 to 6 μm (n = 50), and were matched to Colletotrichum species (Damm et al. 2009). To further confirm species, two representative isolates (JFRL 03-2873 and JFRL 03-2874) were selected for molecular identification. The internal transcribed spacer (ITS), glyceraldehyde-3-phosphate dehydrogenase (GAPDH), chitin synthase (CHS), histone 3 (HIS3), actin (ACT) and β-tubulin 2 (TUB2) regions were amplified and sequenced by using primers sets ITS5/ITS4, Gpd1/Gpd2, CHS-79F/CHS354R, CYLH3F/CYLH3R, ACT-512F/ACT-783R and T1/Bt2b (Tan et al. 2022), respectively. These sequences were deposited into GenBank with accession number PP425890-PP425891 (ITS), PP437551-PP437552 (GAPDH), PP437549-PP437550 (CHS), PP480643-PP480644 (HIS3), PP437547-PP437548 (ACT) and PP437553-PP437554 (TUB2). A BLASTN search revealed high similarity of 99%-100% to ITS (GU227807, 518 nt/519 nt), GAPDH (GU228199, 525 nt/526 nt), CHS (GU228297, 251 nt/251 nt), HIS3 (GU228003, 372 nt/373 nt), ACT (GU227905, 236 nt/237 nt) and TUB2 (GU228101, 490 nt/490 nt) sequences of Colletotrichum spaethianum CBS 167.49. A maximum likelihood phylogenetic tree was constructed by combining ITS, GAPDH, CHS , HIS3, ACT and TUB2 sequences in IQtree web server (Ngugen et al. 2015). The result indicated that the two representative isolates were clustered together with Colletotrichum spaethianum in a clade with 100% bootstrap support. Based on morphologicalobservationandsequenceanalysis, the isolates were identified as C. spaethianum. To confirm pathogenicity, six surface-sterilized leaves of Z. candida were wounded and inoculated with 1 × 106 conidia/ml conidial suspension of JFRL 03-2873, and control leaves were inoculated with sterile water. They were incubated at 25 ℃ with 12 h photoperiod and 80% humidity, theexperimentwasrepeatedtwice. After five days, all leaves inoculated with JFRL 03-2873 displayed anthracnose symptom, whereas the control leaves remained unaffected. We re-isolated C. spaethianum from the symptomatic leaves and identified it based on morphological and molecular characteristics. Previous studies reported that C. spaethianum caused anthracnose on various common herbaceous plants in China (Vieira et al. 2014, Guo et al. 2013), but to our knowledge, this is the first report of C. spaethianum causing anthracnose on Z. candida in China. Anthracnose disease caused great economic loss to the cultivation of landscape plant Z. candida. Therefore, it is necessary to pay more attention to the anthracnose disease of herbaceous plants caused by C. spaethianum and develop appropriate control strategies.

Ab Initio Design of Ni‐Rich Cathode Material with Assistance of Machine Learning for High Energy Lithium‐Ion Batteries

With the widespread use of lithium‐ion batteries in electric vehicles, energy storage, and mobile terminals, there is an urgent need to develop cathode materials with specific properties. However, existing material control synthesis routes based on repetitive experiments are often costly and inefficient, which is unsuitable for the broader application of novel materials. The development of machine learning and its combination with materials design offers a potential pathway for optimizing materials. Here, we present a design synthesis paradigm for developing high energy Ni‐rich cathodes with thermal/kinetic simulation and propose a coupled image‐morphology machine learning model. The paradigm can accurately predict the reaction conditions required for synthesizing cathode precursors with specific morphologies, helping to shorten the experimental duration and costs. After the model‐guided design synthesis, cathode materials with different morphological characteristics can be obtained, and the best shows a high discharge capacity of 206 mAh g−1 at 0.1C and 83% capacity retention after 200 cycles. This work provides guidance for designing cathode materials for lithium‐ion batteries, which may point the way to a fast and cost‐effective direction for controlling the morphology of all types of particles.

The evolution of traditional ancient towns in South China: Tangjiawan Ancient Town in Zhuhai city

ABSTRACT Based on the urban morphology theory of the Conzen School and the actual situation of the Tangjiawan Ancient Town, a morphological process analysis of the Tangjiawan Ancient Town was conducted. The end result is a visualization of the process of urban form evolution. The first objective is to describe the morphological framework of Tangjiawan Ancient Town and the morphological changes that occurred during its development. The current urban landscape is divided into units by superimposing morphological units, building types, and land use. The results of the division also reflect the morphological development, structure, and compositional characteristics of the ancient city of Tangjiawan. Using Tangjiawan Ancient Town in Zhuhai city as an example, on-site research, historical evidence, urban morphology analysis methods, and interviews were used to elaborate and analyze the spatial structure and evolution process of traditional ancient towns in South China. In particular, morphological units, building types, and land use are included. The morphological map of the Tangjiawan ancient town is inconsistent with the current economic-oriented development of ancient town planning. This shows that current planning is less concerned with the physical form of architectural heritage, which may lead to further damage to the landscape of the ancient town. This study provides a strong reference for the follow-up planning of ancient town protection of the same type from the perspective of morphology and area and provides ideas for the subsequent preparation of protection plans.

Polyphasic Approach and Potential Cyanotoxin Production by Planktothrix from the Río Grande de Comitán and Montebello Lakes National Park, Southern Mexico

The development of anthropic activities during recent years has led to an increase in nutrient fluxes in the Río Grande de Comitán and Montebello Lakes National Park, Mexico. In turn, this has modified the dynamics of the biotic community, specifically favoring the presence of cyanobacteria tolerant to contamination. The continual and massive presence of Planktothrix species (spp.) in the system suggests a potential detrimental impact for economic issues and human health. In this study, we identify the morphological and molecular characteristics of Planktothrix populations from seven tropical (1,380–1,740 masl, 23.0–25.5°C) and calcareous lakes and two ponds from a water treatment plant. We also assess the ecological drivers that could be related to the presence of cyanotoxins in the system. The ecological preferences, morphology, 16S rRNA structure, and 16S-23S rRNA internal transcribed spacer found evidence for three species: P. agardhii distributed in neutral to slightly basic water (pH = 7.7–8.7), and P. spiroides and Planktothrix sp. in alkaline waters (pH = 9.1). The presence of the mcyE gene and its validation by liquid chromatography confirmed the presence of two microcystin variants (MC-RR and MC-LR) in at least three populations of P. agardhii. These microcystins put the health of the ecosystem and its inhabitants at risk, a condition that should be addressed and resolved with a water management and detoxification strategy in the basin.

Morphological and molecular characteristics of a Trypanosoma sp. from triatomines (Triatoma rubrofasciata) in China

BackgroundTriatomines (kissing bugs) are natural vectors of trypanosomes, which are single-celled parasitic protozoans, such as Trypanosoma cruzi, T. conorhini and T. rangeli. The understanding of the transmission cycle of T. conorhini and Triatoma rubrofasciata in China is not fully known.MethodsThe parasites in the faeces and intestinal contents of the Tr. rubrofasciata were collected, and morphology indices were measured under a microscope to determine the species. DNA was extracted from the samples, and fragments of 18S rRNA, heat shock protein 70 (HSP70) and glycosomal glyceraldehyde-3-phosphate dehydrogenase (gGAPDH) were amplified and sequenced. The obtained sequences were then identified using the BLAST search engine, followed by several phylogenetic analyses. Finally, laboratory infections were conducted to test whether Tr. rubrofasciata transmit the parasite to rats (or mice) through bites. Moreover, 135 Tr. rubrofasciata samples were collected from the Guangxi region and were used in assays to investigate the prevalence of trypanosome infection.ResultsTrypanosoma sp. were found in the faeces and intestinal contents of Tr. rubrofasciata, which were collected in the Guangxi region of southern China and mostly exhibited characteristics typical of epimastigotes, such as the presence of a nucleus, a free flagellum and a kinetoplast. The body length ranged from 6.3 to 33.9 µm, the flagellum length ranged from 8.7 to 29.8 µm, the nucleus index was 0.6 and the kinetoplast length was −4.6. BLAST analysis revealed that the 18S rRNA, HSP70 and gGAPDH sequences of Trypanosoma sp. exhibited the highest degree of similarity with those of T. conorhini (99.7%, 99.0% and 99.0%, respectively) and formed a well-supported clade close to T. conorhini and T. vespertilionis but were distinct from those of T. rangeli and T. cruzi. Laboratory experiments revealed that both rats and mice developed low parasitaemia after inoculation with Trypanosoma sp. and laboratory-fed Tr. rubrofasciata became infected after feeding on trypanosome-positive rats and mice. However, the infected Tr. rubrofasciata did not transmit Trypanosoma sp. to their offspring. Moreover, our investigation revealed a high prevalence of Trypanosoma sp. infection in Tr. rubrofasciata, with up to 36.3% of specimens tested in the field being infected.ConclusionsOur study is the first to provide a solid record of T. conorhini from Tr. rubrofasciata in China with morphological and molecular evidence. This Chinese T. conorhini is unlikely to have spread through transovarial transmission in Tr. rubrofasciata, but instead, it is more likely that the parasite is transmitted between Tr. rubrofasciata and mice (or rats). However, there was a high prevalence of T. conorhini in the Tr. rubrofasciata from our collection sites and numerous human cases of Tr. rubrofasciata bites were recorded. Moreover, whether these T. conorhini strains are pathogenic to humans has not been investigated.Graphical

3D intraoral scanning techniques support the effects of crown morphology on dental caries

BackgroundWith the development and utilization of three-dimensional (3D) intraoral scanning (IOS) technology, the morphological characteristics of teeth were quantitatively assessed. In this research, we aimed to explore the prevalence of dental caries in relation to each measurable morphological indicator of the tooth body via 3D intraoral scanning techniques.MethodsA hospital-based single-centre study was conducted at our hospital from Dec. 2021 to Apr. 2023. A total of 53 patients were involved in the study, providing complete morphological data for 79 teeth. Each patient completed an oral hygiene routine questionnaire and underwent examination by an experienced dentist to evaluate caries conditions before undergoing 3D intraoral scanning to obtain a digital dental model. Geomagic Studio 2014 was used to extract oral morphological data from the models. The acquired data were entered, cleaned and edited using Excel 2016 and subsequently exported to SPSS version 25.0 for analysis. Chi-square analysis and logistic regression analyses were employed to test the associations.ResultsAmong the participants, 33 (61.1%) were female, with a mean age of 26.52 ± 10.83 years. Significant associations were found between dental caries and the vertical distance between the distal tip and the gum (OR 14.02; 95% CI 1.80-109.07; P = 0.012), the distal lateral horizontal distance of occlusion (OR 0.40; 95% CI 0.18–0.90; P = 0.026), and the mesial horizontal distance of occlusion (OR 2.20; 95% CI 1.12–4.31; P = 0.021). The Hosmer–Lemeshow test indicated a P value of 0.33.ConclusionsThe vertical distance between the distal tip and the gum, the distal lateral horizontal distance of the occlusion and the mesial horizontal distance of the occlusion were the influencing factors for dental caries (identified as independent risk factors). We hypothesize that these factors may be associated with the physiological curvature of teeth and the role of chewing grooves in plaque formation over time. However, further studies involving larger population samples and more detailed age stratification are still needed.

Single nucleotide polymorphisms in the KRT82 promoter region modulate irregular thickening and patchiness in the dorsal skin of New Zealand rabbits

BackgroundWhile rabbits are used as models in skin irritation tests, the presence of irregular patches and thickening on the dorsal skin can affect precise evaluation. In this study, genes associated with patchiness or non-patchiness on the dorsal skin of New Zealand rabbits were investigated to identify potential regulators of the patchiness phenotype.ResultsThe results showed that parameters associated with hair follicles (HFs), such as HF density, skin thickness, and HF depth, were augmented in rabbits with the patchiness phenotype relative to the non-patchiness phenotype. A total of 592 differentially expressed genes (DEGs) were identified between the two groups using RNA-sequencing. These included KRT72, KRT82, KRT85, FUT8, SOX9, and WNT5B. The functions of the DEGs were investigated by GO and KEGG enrichment analyses. A candidate gene, KRT82, was selected for further molecular function verification. There was a significant positive correlation between KRT82 expression and HF-related parameters, and KRT82 overexpression and knockdown experiments with rabbit dermal papilla cells (DPCs) showed that it regulated genes related to skin and HF growth and development. Investigation of single nucleotide polymorphisms (SNPs) in the exons and promoter region of KRT82 identified four SNPs in the promoter region but none in the exons. The G.-631G > T, T.-696T > C, G.-770G > T and A.-873 A > C alleles conformed to the Hardy − Weinberg equilibrium, and three identified haplotypes showed linkage disequilibrium. Luciferase reporter assays showed that the core promoter region of KRT82 was located in the − 600 to − 1200 segment, in which the four SNPs were located.ConclusionsThe morphological characteristics of the patchiness phenotype were analyzed in New Zealand rabbits and DEGs associated with this phenotype were identified by RNA-sequencing. The biological functions of the gene KRT82 associated with this phenotype were analyzed, and four SNPs were identified in the promoter region of the gene. These findings suggest that KRT82 may be a potential biomarker for the breeding of experimental New Zealand rabbits.

Risk factors for acute kidney injury and kidney relapse in patients with lupus podocytopathy

Abstract Background Patients with lupus podocytopathy show a high incidence of acute kidney injury (AKI) and relapse, but the risk factors and mechanisms were unclear. This study analyzed the clinical-pathological features, and risk factors for AKI and relapse in lupus podocytopathy patients. Methods The cohort of lupus podocytopathy was generated by screening the biopsies of patients with lupus nephritis (LN) from 2002 to 2022, and was divided into the mild glomerular lesion (MGL) and FSGS groups based on glomerular morphological characteristics. The acute (ATI) and chronic (CTI) tubulointerstitial lesions were semi-quantitatively scored. Logistic and Cox regression was employed to identify the risk factors for AKI and relapse, respectively. Results Among 6 052 LN cases, 98 (1.6%) were diagnosed as lupus podocytopathy, with 71 in the MGL group and 27 in the FSGS group. All patients presented with nephrotic syndrome, and 33 (34.7%) of them had AKI. Seventy-seven (78.6%) patients achieved complete renal response (CRR) within 12 weeks of induction treatment, in which there was no difference in CRR rate between glucocorticoid monotherapy and combination therapy with glucocorticoids plus immunosuppressants. Compared to the MGL group, patients in the FSGS group had significantly higher incidences of hypertension and hematuria; in addition, they had higher SLEDAI-2 K, ATI and CTI scores, but a significantly lower CRR rate. Urinary protein ≥ 7.0 g/24 h and serum C3 ≤ 0.750 g/L were independent risk factors for AKI. During a median follow-up of 78 months, 57 cases (60.0%) had relapse, and none reached the kidney endpoint. Failure to achieve CRR within 12 weeks, maintenance with glucocorticoid monotherapy and AKI at onset were independent risk factors for the kidney relapse. Conclusions In this study, histological subtypes of lupus podocytopathy are found to be associated with clinical feature and treatment response;in addition, several risk factors associated with AKI occurrence and kidney relapse are identified.

Core characteristics of sublingual veins analysis and its relationship with hypertension.

The sublingual vein (SV) is a specialized diagnostic method used in Traditional Chinese Medicine (TCM). Despite its ability to objectively reflect blood flow, SV is often overlooked in clinical practice. This study aims to analyze the core characteristics of SV and investigate the in-depth relationship between its digital characteristics and hypertension. The goal is to find a link between SV and hypertension and break out of the current situation. Modern digital analysis techniques were applied to the traditional SV diagnostic theory. In a controlled study with 204 participants, the digital characteristics of SV were documented using TFDA-1, and its color value was analyzed using TDAS. Morphological characteristics of SV, such as trunklength, width, and tortuosity, were examined by combining computer vision with expert interpretation. This involved the application of automatic ranging methods and a rectangular approximation algorithm, which are novel approaches in the field of TCM. The t-test and Mann-Whitney U test were used to analyze the digital characteristics of SV in hypertension. Binary logistic regression and neural network models were established using machine learning to explore the deep relationship between SV characteristics and hypertension. There was a significant difference of the tortuosity of SV between the two groups (Z=-2.629, p= 0.009). The results revealed thick width of SV (OR = 2.64, 95% CI: 1.02-6.79) was the risk factor for hypertension. Addition of SV characteristics improved overall percent correct for hypertension prediction to 80%. TCM method of diagnosis of SV has been greatly expanded in terms of technical means, and the close relationship between SV and hypertension has been found in clinical data.

Association of Morphology of Lenticulostriate Arteries and Proximal Plaque Characteristics With Single Subcortical Infarction: A Whole-Brain High-Resolution Vessel Wall Imaging Study.

We aimed to investigate the association of characteristics of lenticulostriate artery (LSA) morphology and parental atheromatous disease (PAD) with single subcortical infarction (SSI) and to explore whether the LSA morphology is correlated with proximal plaque features in asymptomatic PAD. Patients with acute SSI were prospectively enrolled and classified as large- and small-SSI groups. The clinical data and imaging features of LSA morphology (branches, length, dilation, and tortuosity) and middle cerebral artery plaques (normalized wall index, remodeling index, enhancement degree, and hyperintense plaques) were evaluated. Logistic regression was performed to determine the association of large SSIs with morphologic features of LSAs and plaques. The Spearman correlation between the morphologic characteristics of LSAs and plaque features in asymptomatic PAD was analyzed. Of the 121 patients recruited with symptomatic PAD, 102 had coexisting asymptomatic contralateral PAD. The mean length of LSAs (odds ratio, 0.84 [95% CI, 0.73-0.95]; P=0.007), mean tortuosity of LSAs (odds ratio, 1.13 [95% CI, 1.05-1.22]; P=0.002), dilated LSAs (odds ratio, 22.59 [95% CI, 2.46-207.74]; P=0.006), and normalized wall index (odds ratio, 1.08 [95% CI, 1.01-1.15]; P=0.022) were significantly associated with large SSIs. Moreover, the normalized wall index was negatively correlated with the mean length of LSAs (r=-0.348, P<0.001), and the remodeling index was negatively correlated with the mean tortuosity of LSAs (r=-0.348, P<0.001) in asymptomatic PAD. Our findings suggest that mean length of LSAs, mean tortuosity of LSAs, dilated LSAs, and normalized wall index are associated with large SSIs. Moreover, plaque features in asymptomatic PAD are correlated with morphologic features of LSAs.

The impact of PET/CT and brain MRI for metastasis detection among patients with clinical T1-category lung cancer: Findings from a large-scale cohort study

Abstract Purpose [18F]-FDG PET/CT and brain MRI are common approaches to detect metastasis in patients of lung cancer. Current guidelines for the use of PET/CT and MRI in clinical T1-category lung cancer lack risk-based stratification and require optimization. This study stratified patients based on metastatic risk in terms of the lesions' size and morphological characteristics. Methods The detection rate of metastasis was measured in different sizes and morphological characteristics (solid and sub-solid) of tumors. To confirm the cut-off value for discriminating metastasis and overall survival (OS) prediction, the receiver operating characteristic (ROC) analysis was performed based on PET/CT metabolic parameters (SUVmax/SUVmean/SULpeak/MTV/TLG), followed by Kaplan–Meier analysis for survival in post-operation patients with and without PET/CT plus MRI. Results 2,298 patients were included. No metastasis was observed in patients with solid nodules &lt; 8.0 mm and sub-solid nodules &lt; 10.0 mm. The cut-off of PET/CT metabolic parameters on discriminating metastasis were 1.09 (SUVmax), 0.26 (SUVmean), 0.31 (SULpeak), 0.55 (MTV), and 0.81 (TLG), respectively. Patients undergoing PET/CT plus MRI exhibited longer OS compared to those who did not receive it in solid nodules ≥ 8.0 mm &amp; sub-solid nodules ≥ 10.0 mm (HR, 0.44; p &lt; 0.001); in solid nodules ≥ 8.0 mm (HR, 0.12; p&lt;0.001) and in sub-solid nodules ≥ 10.0 mm (HR; 0.61; p=0.075), respectively. Compared to patients with metabolic parameters lower than cut-off values, patients with higher metabolic parameters displayed shorter OS: SUVmax (HR, 12.94; p &lt; 0.001), SUVmean (HR, 11.33; p &lt;0.001), SULpeak (HR, 9.65; p &lt; 0.001), MTV (HR, 9.16; p = 0.031), and TLG (HR, 12.06; p &lt; 0.001). Conclusion The necessity of PET/CT and MRI should be cautiously evaluated in patients with solid nodules &lt; 8.0 mm and sub-solid nodules &lt; 10.0 mm, however, these examinations remained essential and beneficial for patients with solid nodules ≥ 8.0 mm and sub-solid nodules ≥ 10.0 mm.

The impact of biochar addition on morpho-physiological characteristics, yield and water use efficiency of tomato plants under drought and salinity stress

The use of saline water under drought conditions is critical for sustainable agricultural development in arid regions. Biochar is used as a soil amendment to enhance soil properties such as water-holding capacity and the source of nutrition elements of plants. Thus, the research was carried out to assess the impact of biochar treatment on the morphological and physiological characteristics and production of Solanum lycopersicum in greenhouses exposed to drought and saline stresses. The study was structured as a three-factorial in split-split-plot design. There were 16 treatments across three variables: (i) water quality, with freshwater and saline water, with electrical conductivities of 0.9 and 2.4 dS m− 1, respectively; (ii) irrigation level, with 40%, 60%, 80%, and 100% of total evapotranspiration (ETC); (iii) and biochar application, with the addition of biochar at a 3% dosage by (w/w) (BC3%), and a control (BC0%). The findings demonstrated that salt and water deficiency hurt physiological, morphological, and yield characteristics. Conversely, the biochar addition enhanced all characteristics. Growth-related parameters, such as plant height, stem diameter, leaf area, and dry and wet weight, and leaf gas exchange attributes, such rate of transpiration and photosynthesis, conductivity, as well as leaf relative water content were decreased by drought and salt stresses, especially when the irrigation was 60% ETc or 40% ETc. The biochar addition resulted in a substantial enhancement in vegetative growth-related parameters, physiological characteristics, efficiency of water use, yield, as well as reduced proline levels. Tomato yield enhanced by 4%, 16%, 8%, and 3% when irrigation with freshwater at different levels of water deficit (100% ETc, 80% ETc, 60% ETc, and 40% ETc) than control (BC0%). Overall, the use of biochar (3%) combined with freshwater shows the potential to enhance morpho-physiological characteristics, support the development of tomato plants, and improve yield with higher WUE in semi-arid and arid areas.

The role of reduced graphene oxide on mitigation of lead phytotoxicity in Triticum aestivum L.plants at morphological and physiological levels

Rapid global industrialization and an increase in population have enhanced the risk of heavy metals accumulation in plant bodies to disrupt the morphological, biochemical, and physiological processes of plants. To cope with this situation, reduced graphene oxide (rGO) NPs were used first time to mitigate abiotic stresses caused in plant. In this study, rGO NPs were synthesized and reduced with Tecoma stans plant leave extract through modified Hummer's methods. The well prepared rGO NPs were characterized by ultra-violet visible spectroscopy (UV–Vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Zeta potential, and scanning electron microscopy (SEM). However, pot experiment was conducted with four different concentrations (15, 30, 60, 120 mg/L) of rGO NPs and three different concentrations (300, 500,700 mg/L) of lead (Pb) stress were applied. To observe the mitigative effects of rGO NPs, 30 mg/L of rGO NPs and 700 mg/L of Pb were used in combination. Changes in morphological and biochemical characteristics of wheat plants were observed for both Pb stress and rGO NPs treatments. Pb was found to inhibit the morphological and biochemical characteristics of plants. rGO NPs alone as well as in combination with Pb was found to increase the chlorophyll content of wheat plants. Under Pb stress conditions and rGO NPs treatments, antioxidant enzyme activities like ascorbate peroxidases (APX), superoxide dismutase (SOD), peroxidase (POD) and catalase (CAT) were observed. Current findings revealed that greenly reduced graphene oxide NPs can effectively promote growth in wheat plants under Pb stress by elevating chlorophyll content of leaves, reducing the Pb uptake, and suppressing ROS produced due to Pb toxicity.

FRACTAL CHARACTERISTICS OF CORE DISKING FRACTURE SURFACES

The morphological characteristics of core disking can reflect the in-situ stress field characteristics to a certain extent, but a quantitative description method for disking-induced fracture surfaces is needed. The fractal geometry was introduced to refine the three-dimensional characteristics of the core disking fracture surfaces, and the disking mechanism was explored through morphological characteristics. The innovative concentric-different scale method was proposed to divide the circular surfaces into square surfaces of different sizes. Furthermore, the applicability of four cubic covering methods for single fractal calculation was studied. Finally, the relative differential cubic covering method and multifractal method were used to calculate the three-dimensional data of core disking fracture surfaces in the Jinping area. The results showed that the concentric-different scale method fits the fractal dimension changing law in the exploration of different surface sizes. Using the differential cubic covering method and the relative differential cubic covering method can obtain good results for smoother surfaces. The disking was caused by tensile stress due to high crustal stress unloading, and the cracks originated from the inside of the core. Fractal theory is conducive to analyzing the morphology of rock fracture surfaces and provides guidance for exploring the failure mechanism and influencing factors.

Habitat persistency analysis with HEM‐PEAK: A novel approach for the assessment of hydropeaking impacts and mitigation measure design

AbstractHydropeaking is one of the most severe pressures of hydropower on aquatic ecosystems. The discharge fluctuations due to turbine operations cause frequent shifts in hydraulic habitat characteristics such as flow velocity and water depth. Those rapid changes on a daily or sub daily basis, however, are beyond the possibilities of evolutionary adaptations of aquatic organisms, especially for fish in their sensitive early life stages. Thus, one central aim in terms of the evaluation of hydropeaking impacts or the design of mitigation measures is the analysis or establishment of hydraulically stable habitat conditions. This study presents a novel habitat assessment tool to quantify hydraulically stable habitat conditions in the form of a persistency of suitable habitats in hydropeaking reaches. The HEM‐PEAK tool determines areas that contain equal ranges of depth‐averaged flow velocity and water depth for both base flow and peak flow in three categories. Those areas also exclude dewatering sites, which have to be seen as ‘residual risk for stranding’. In the present study, the model was used to evaluate the YOY habitats of brown trout and grayling. The model was tested for 14 hydropeaking reaches to evaluate the quantity of habitat persistency for different morphological characteristics, such as straight, winding, alternating gravel bars and bifurcation reaches. The findings reveal that there is no relationship between hydraulically stable habitat conditions with reach scale bed slope or the magnitude of dewatering areas. However, the changes in specific discharge in relation to bankfull width could be negatively related to the magnitude of hydraulically stable habitat conditions independent of the morphological type. This relationship is minor for summer scenarios compared to spring, as the initial habitat quality during the increased base flow conditions is already limiting the availability of suitable habitats which might have persistency during peak flow. In detail, several self‐forming bars like point bars and artificial structures like groins and coarse rip‐rap could be determined, which could be explicitly addressed in terms of mitigation measure design based on the application of the HEM‐PEAK tool.

Interlocking characteristic and its correlation with interlayer shear strength in typical double-layered asphalt systems

ABSTRACT Interlayer bonding is crucial to maintaining the structural integrity of asphalt pavement structures. Addressing a crucial research gap, this study uniquely investigated the impact of interface morphology on interlocking properties and interlayer shear strength in three typical double-layered asphalt systems: AC-13/AC-20, SMA-13/AC-20, and OGFC-13/AC-20. Through the innovative application of nondestructive separation technology and three-dimensional (3D) laser scanning, interface morphology characteristics were thoroughly analyzed. This approach enabled the detailed extraction of texture parameters, unveiling the complex relationship between interface morphology and interlayer bonding strength. Interface shear tests further assessed the difference in shear strength, revealing significant differences in texture characteristics influenced by the mineral size variance in the upper layer. This analysis led to the development of a predictive model for interlayer shear strength based on morphological characteristics, offering a new tool for approximating the shear bonding condition, despite challenges in capturing the complex interaction between interface morphology and interlocking effects. The comprehensive examination of 3D interface morphology, combined with the shear strength analysis, clarified the mechanisms of interlayer bonding in relation to interface morphology. This breakthrough provides essential insights into the role of interface morphology in bonding efficacy and represents a significant advancement in understanding of interlayer bonding mechanisms.

Quantitative morphological analysis framework of infant cranial sutures and fontanelles based on CT images.

Characterizing the suture morphological variation is a crucial step to investigate the influence of sutures on infant head biomechanics. This study aimed to establish a comprehensive quantitative framework for accurately capturing the cranial suture and fontanelle morphologies in infants. A total of 69 CT scans of 2-4 month-old infant heads were segmented to identify semilandmarks at the borders of cranial sutures and fontanelles. Morphological characteristics, including length, width, sinuosity index (SI), and surface area, were measured. For this, an automatic method was developed to determine the junction points between sutures and fontanelles, and thin-plate-spline (TPS) was utilized for area calculation. Different dimensionality reduction methods were compared, including nonlinear and linear principal component analysis (PCA), as well as deep-learning-based variational autoencoder (VAE). Finally, the significance of various covariates was analyzed, and regression analysis was performed to establish a statistical model relating morphological parameters with global parameters. This study successfully developed a quantitative morphological framework and demonstrate its application in quantifying morphologies of infant sutures and fontanelles, which were shown to significantly relate to global parameters of cranial size, suture SI, and surface area for infants aged 2-4 months. The developed framework proved to be reliable and applicable in extracting infant suture morphology features from CT scans. The demonstrated application highlighted its potential to provide valuable insights into the morphologies of infant cranial sutures and fontanelles, aiding in the diagnosis of suture-related skull fractures. Infant suture, Infant fontanelle, Morphological variation, Morphology analysis framework, Statistical model.

Distinctiveness of Femoral and Acetabular Mesenchymal Stem and Progenitor Populations in Patients with Primary and Secondary Hip Osteoarthritis Due to Developmental Dysplasia

Primary hip osteoarthritis (pOA) develops without an apparent underlying reason, whereas secondary osteoarthritis arises due to a known cause, such as developmental dysplasia of the hips (DDH-OA). DDH-OA patients undergo total hip arthroplasty at a much younger age than pOA patients (50.58 vs. 65 years in this study). Recently, mesenchymal stem and progenitor cells (MSPCs) have been investigated for the treatment of osteoarthritis due to their immunomodulatory and regenerative potential. This study identified cells in subchondral bone expressing common MSPC markers (CD10, CD73, CD140b, CD146, CD164, CD271, GD2, PDPN) in vivo and compared the proportions of these populations in pOA vs. DDH-OA, further correlating them with clinical, demographic, and morphological characteristics. The differences in subchondral morphology and proportions of non-hematopoietic cells expressing MSPC markers were noted depending on OA type and skeletal location. Bone sclerosis was more prominent in the pOA acetabulum (Ac) in comparison to the DDH-OA Ac and in the pOA Ac compared to the pOA femoral head (Fh). Immunophenotyping indicated diagnosis-specific differences, such as a higher proportion of CD164+ cells and their subsets in DDH-OA, while pOA contained a significantly higher proportion of CD10+ and GD2+ cells and subsets, with CD271+ being marginally higher. Location-specific differences showed that CD271+ cells were more abundant in the Fh compared to the Ac in DDH-OA patients. Furthermore, immunohistochemical characterization of stromal bone-adjacent cells expressing MSPC markers (CD10, CD164, CD271, GD2) in the Ac and Fh compartments was performed. This research proved that immunophenotype profiles and morphological changes are both location- and disease-specific. Furthermore, it provided potentially effective targets for therapeutic strategies. Future research should analyze the differentiation potential of subsets identified in this study. After proper characterization, they can be selectively targeted, thus enhancing personalized medicine approaches in joint disease management.

Discovery and characterization of a novel pathogen Erwinia pyri sp. nov. associated with pear dieback: taxonomic insights and genomic analysis

In 2022, a novel disease similar to pear fire blight was found in a pear orchard in Zhangye City, Gansu Province, China. The disease mainly damages the branches, leaves, and fruits of the plant. To identify the pathogen, tissue isolation and pathogenicity testing (inoculating the potential pathogen on healthy plant tissues) were conducted. Furthermore, a comprehensive analysis encompassing the pathogen’s morphological, physiological, and biochemical characteristics and whole-genome sequencing was conducted. The results showed that among the eight isolates, the symptoms on the detached leaves and fruits inoculated with isolate DE2 were identical to those observed in the field. Verifying Koch’s postulates confirmed that DE2 was the pathogenic bacterium that causes the disease. Based on a 16S rRNA phylogenetic tree, isolate DE2 belongs to the genus Erwinia. Biolog and API 20E results also indicated that isolate DE2 is an undescribed species of Erwinia. Isolate DE2 was negative for oxidase. Subsequently, the complete genome sequence of isolate DE2 was determined and compared to the complete genome sequences of 29 other Erwinia species based on digital DNA–DNA hybridization (dDDH) and average nucleotide identity (ANI) analyses. The ANI and dDDH values between strain DE2 and Erwinia species were both below the species thresholds (ANI &amp;lt; 95–96%, dDDH&amp;lt;70%), suggesting that isolate DE2 is a new species of Erwinia. We will temporarily name strain DE2 as Erwinia pyri sp. nov. There were 548 predicted virulence factors in the genome of strain DE2, comprising 534 on the chromosome and 5 in the plasmids. The whole genome sequence of strain DE2 has been submitted to the NCBI database (ASM3075845v1) with accession number GCA_030758455.1. The strain DE2 has been preserved at the China Center for Type Culture Collection (CCTCC) under the deposit number CCTCC AB 2024080. This study represents the initial report of a potentially new bacterial species in the genus Erwinia that causes a novel pear dieback disease. The findings provide a valuable strain resource for the study of the genus Erwinia and establish a robust theoretical foundation for the prevention and control of emerging pear dieback diseases.